publication venue for

• Upcycling of demolition material from concrete and brick for the production of cold-bound, alkali-activated lightweight aggregates.  56. 2023
• Early metakaolin reactions in pozzolanic R3-test: calorimetry baseline correction of initial temperature jump due to ex-situ mixing.  56. 2023
• Recommendation of RILEM TC 271-ASC: New accelerated test procedure for the assessment of resistance of natural stone and fired-clay brick units against salt crystallization.  56. 2023
• Diffusion potentials in saturated hardened cement paste upon chloride exposure.  56. 2023
• Compressive behaviour of alkali-activated slag-based concrete and Portland cement concrete incorporating novel multiple hooked-end steel fibres.  56. 2023
• Reactivation of hydrated cement powder by thermal treatment for partial replacement of ordinary portland cement.  56. 2023
• Carbonation rate of alkali-activated concretes and high-volume SCM concretes: a literature data analysis by RILEM TC 281-CCC.  55. 2022
• Fire induced concrete spalling in combination with size effects.  55. 2022
• Physicochemical properties of Portland cement/calcium aluminate cement/calcium sulfate ternary binder exposed to long-term deep-sea conditions.  55. 2022
• Durability performance of binary and ternary blended cementitious systems with calcined clay: a RILEM TC 282-CCL, review.  55. 2022
• Report of RILEM TC 267-TRM phase 3: validation of the R3 reactivity test across a wide range of materials.  55. 2022
• Report of RILEM TC 281-CCC: outcomes of a round robin on the resistance to accelerated carbonation of Portland, Portland-fly ash and blast-furnace blended cements.  55. 2022
• 3D printing as an automated manufacturing method for a carbon fiber-reinforced cementitious composite with outstanding flexural strength (105 N/mm2).  54. 2021
• The load-bearing behaviour of a reinforced concrete beam investigated by optical measuring techniques.  54. 2021
• Application of super absorbent polymers (SAP) in concrete construction—update of RILEM state-of-the-art report.  54. 2021
• Durability of clinker reduced shotcrete: Ca2+ leaching, sintering, carbonation and chloride penetration.  54. 2021
• RILEM TC 247-DTA round robin test: sulfate resistance, alkali-silica reaction and freeze–thaw resistance of alkali-activated concretes.  53. 2020
• Understanding the carbonation of concrete with supplementary cementitious materials: a critical review by RILEM TC 281-CCC.  53. 2020
• Experimental pull-out tests and design indications for strength anchors installed in masonry walls.  53. 2020
• Cyclic tensile tests on prestressing strands embedded in concrete 2020
• RILEM TC 247-DTA round robin test: carbonation and chloride penetration testing of alkali-activated concretes.  53. 2020
• RILEM TC-238 SCM recommendation on hydration stoppage by solvent exchange for the study of hydrate assemblages.  51. 2018
• Report of TC 238-SCM: hydration stoppage methods for phase assemblage studies of blended cements—results of a round robin test.  51. 2018
• A new test method to determine the gaseous oxygen diffusion coefficient of cement pastes as a function of hydration duration, microstructure, and relative humidity.  51. 2018
• A review of characterisation methods for superabsorbent polymer (SAP) samples to be used in cement-based construction materials: report of the RILEM TC 260-RSC.  50. 2017
• Outcomes of the RILEM round robin on degree of reaction of slag and fly ash in blended cements.  50. 2017
• Acoustic emission and microstructural changes in fly ash geopolymer concretes exposed to simulated fire.  49:5243-5254. 2016
• Ingress of NaCl in concrete with alkali reactive aggregate: effect on silicon solubility.  49:4291-4303. 2016
• Form pressure generated by fresh concrete: a review about practice in formwork design.  47:1099-1113. 2014
• Environmental compatibility of bitumen waterproofing.  46:1257-1264. 2013
• In situ assessment of structural timber using non-destructive techniques.  47:749-766. 2013
• Experimental investigation and modeling of hydration and performance evolution of fly ash cement.  47:1259-1269. 2013
• Effect of moisture on the reliability of void detection in brickwork masonry using radar, ultrasonic and complex resistivity tomography.  46:1723-1735. 2013
• Pore structure and permeability of hardened calcium aluminate cement pastes of low w/c ratio.  46:1497-1506. 2012
• Properties and performance of silane: blended cement systems.  46:1429-1439. 2012
• Influence of combined doping of tricalcium silicate with MgO, Al2O3 and Fe2O3: synthesis, grindability, X-ray diffraction and 29Si NMR.  41:1729-1740. 2008
• NMR relaxometry during internal curing of Portland cements by lightweight aggregates.  41:1647-1655. 2008
• Evaluation of the strand in cement (SIC) test for GRCs with improved durability.  41:1109-1116. 2007
• On relationships between the mechanical properties of recycled aggregate concrete: An overview.  39:655-664. 2007
• Load–bearing behaviour and simulation of textile reinforced concrete.  39:765-776. 2006
• Round-robin analysis of the RILEM TC 162-TDF beam-bending test: Part 2—Approximation of δ from the CMOD response.  36:621-630. 2003
• Microbial impact on building materials: an overview.  36:342-352. 2003
• Hygral stress in hardened cement paste.  32:627-634. 1999