publication venue for
- Modeling the durability of novel cementitious materials prepared with CEM II/C-M exposed to drying and carbonation. 401:132625-132625. 2023
- Characterization of hygrothermal properties of two wood species- the impact of anisotropy on their thermal and moisture behaviors. 398:132375-132375. 2023
- Efficiency of limestone in clinker-reduced binders: Consideration of water-binder ratio, capillary porosity and compressive strength. 386:131594-131594. 2023
- Calculation approach of multi keyed dry joints for sustainable modular precast element constructions made of UHPFRC. 370:130687-130687. 2023
- On the porosity of low-clinker shotcrete and accelerated pastes. 368:130461-130461. 2023
- Self-healing behavior of high-strength strain-hardening cement-based composites (HS-SHCC) blended with limestone calcined clay cement (LC3). 370:130633-130633. 2023
- Acid attack on concrete – Damage zones of concrete and kinetics of damage in a simulating laboratory test method for wastewater systems. 366:130121-130121. 2023
- Effect of alkali and sulfate on early hydration of Portland cements at high water to cement ratio. 345:128283-128283. 2022
- Low-sulfate autoclaved aerated concrete (AAC): A recyclable AAC with calcined clay. 342:127984-127984. 2022
- Hygric deformation of hardened cement paste with limestone-rich cements under cyclic ad- and desorption. 340:127508-127508. 2022
- Influence of water to cement ratio on the compatibility of polycarboxylate superplasticizer with Portland cement. 341:127846-127846. 2022
- The role of calcium silicates and quicklime on the reactivity of rehydrated cements. 340:127625-127625. 2022
- Waste clay from bauxite beneficiation to produce calcium sulphoaluminate eco-cements. 340:127703-127703. 2022
- Acceleration of cement hydration – A review of the working mechanisms, effects on setting time, and compressive strength development of accelerating admixtures. 323:126554-126554. 2022
- Composition of the reactivity of engineered slags from bauxite residue and steel slag smelting and use as SCM for Portland cement. 321:126331-126331. 2022
- Selection of backfill grout for shallow geothermal systems: Materials investigation and thermo-physical analysis. 318:125832-125832. 2022
- Evaluation of zeta potential of calcined clays and time-dependent flowability of blended cements with customized polycarboxylate-based superplasticizers. 308:125061-125061. 2021
- Sustainable concrete formulations to mitigate Alkali-Silica reaction in recycled concrete aggregates (RCA) for concrete infrastructure. 307:124919-124919. 2021
- Efflorescence during the drying of a technical gypsum body: Application of thermodynamic principles. 303:124445-124445. 2021
- Effect of different sulphate carriers on Portland cement hydration in the presence of triethanolamine. 294:123528-123528. 2021
- Effect of microcrystalline cellulose on geopolymer and Portland cement pastes mechanical performance. 288:123053-123053. 2021
- Flexural behavior of sandwich panels combining curauá fiber-reinforced composite layers and autoclaved aerated concrete core. 286:122890-122890. 2021
- Production of autoclaved aerated concrete with silica raw materials of a higher solubility than quartz Part II: Influence of autoclaving temperature. 287:123072-123072. 2021
- Evaluation of the effects of bismuth oxide (Bi2O3) micro and nanoparticles on the mechanical, microstructural and γ-ray/neutron shielding properties of Portland cement pastes. 284:122758-122758. 2021
- Investigating the mechanical and thermal properties of compressed earth bricks made by eco-friendly stabilization materials as partial or full replacement of cement. 281:122535-122535. 2021
- The effects of nanosilica on the fresh and hardened properties of 3D printable mortars. 281:122574-122574. 2021
- Evaluation of the chemical index model for predicting supplementary cementitious material dosage to prevent the alkali-silica reaction in concrete. 275:122158-122158. 2021
- New insights into the effects of aging on Portland cement hydration and on retarder performance. 274:122104-122104. 2021
- Advances in multifunctional graphene-geopolymer composites. 272:121619-121619. 2021
- Production of autoclaved aerated concrete with silica raw materials of a higher solubility than quartz part I: Influence of calcined diatomaceous earth. 272:122014-122014. 2021
- Calcined brick clays and mixed clays as supplementary cementitious materials: Effects on the performance of blended cement mortars. 266:120990-120990. 2021
- Hygrothermal characterization of a fictitious homogenized porous material to describe multiphase heat and moisture transport in massive historic walls. 266:121497-121497. 2021
- β-Naphthalene sulfonate formaldehyde-based nanocomposites as new seeding materials for Portland cement. 264:120240-120240. 2020
- Behavior of blends of CSA and Portland cements in high chloride environment. 262:120852-120852. 2020
- Compressive strength of mortars incorporating alkali-activated materials as partial or full replacement of cement. 261:120518-120518. 2020
- Effect of non-ionic auxiliary dispersants on the rheological properties of mortars and concretes of low water-to-cement ratio. 259:119780-119780. 2020
- Plastic concrete for cut-off walls: A review. 255:119248-119248. 2020
- Influence of carbonation on the microstructure and the gas diffusivity of hardened cement pastes. 253:119227-119227. 2020
- Recent advances in carbon nanotube-geopolymer composite. 252:118940-118940. 2020
- Geopolymers as an alternative to Portland cement: An overview. 237:117455-117455. 2020
- A new test method to characterize the pressure-dependent shear behavior of fresh concrete. 233:117255-117255. 2020
- Experimental and numerical studies on masonry after exposure to elevated temperatures. 230:116926-116926. 2020
- Mineralogical and microstructural response of hydrated cement blends to leaching. 229:116902-116902. 2019
- Effect of silica modulus on the geopolymerization activity of natural pozzolans. 219:31-43. 2019
- The PONKCS method applied for time resolved XRD quantification of supplementary cementitious material reactivity in hydrating mixtures with ordinary Portland cement. 214:449-457. 2019
- Flexural behaviour of steel and macro-PP fibre reinforced concretes based on alkali-activated binders. 211:583-593. 2019
- Maximization of the reuse of industrial residues for the production of eco-friendly CSA-belite clinker. 208:250-257. 2019
- Durability of shotcrete for underground support– Review and update. 202:465-493. 2019
- Hygrothermal performance optimization on bamboo building envelope in Hot-Humid climate region. 202:223-245. 2019
- Assessment of compressive strength of historic masonry using non-destructive and destructive techniques. 193:196-210. 2018
- Ternary mix design of grout material for structural repair using statistical tools. 189:170-180. 2018
- Study of alkali activated slag as alternative pavement binder. 186:626-634. 2018
- 3D finite element modelling of corrosion of lap splice joints in concrete. 169:124-131. 2018
- Effectiveness of a calcium silicate hydrate – Polycarboxylate ether (C-S-H–PCE) nanocomposite on early strength development of fly ash cement. 169:20-27. 2018
- Strength development of GGBS and fly ash concretes and applicability of fib model code’s maturity function – A critical review. 162:830-846. 2018
- Portland metakaolin cement containing dolomite or limestone – Similarities and differences in phase assemblage and compressive strength. 157:214-225. 2017
- Material moisture content of wood and cement mortars – Electrical resistance-based measurements in the high ohmic range. 153:640-646. 2017
- Assessment of Greener Cement by employing thermally treated sugarcane straw ashes. 141:343-352. 2017
- Behavior of flax FRP tube encased recycled aggregate concrete with clay brick aggregate. 136:265-276. 2017
- Algorithm for automatic detection and analysis of cracks in timber beams from LiDAR data. 130:41-53. 2017
- Effect of carbonation in supercritical CO2 on the properties of hardened cement paste of different alkalinity. 123:704-711. 2016
- A novel mix design methodology for Recycled Aggregate Concrete. 122:362-372. 2016
- The impact of alumina availability on sulfate resistance of slag composite cements. 119:356-369. 2016
- Roofing slate standards: A critical review. 115:93-104. 2016
- Development of a lime based grout for cracks repair in earthen constructions. 110:323-332. 2016
- Time-resolved in situ investigation of Portland cement hydration influenced by chemical admixtures. 106:18-26. 2016
- Assessing the pozzolanic activity of cements with added sugar cane straw ash by synchrotron X-ray diffraction and Rietveld analysis. 98:44-50. 2015
- Early hydration of Portland cement studied under microgravity conditions. 93:877-883. 2015
- Influence of hydrothermal conditions with 200°C and 15.5bars on the properties of hardened HPC 2015
- Upgrading the quality of mixed recycled aggregates from construction and demolition waste by using near-infrared sorting technology. 75:121-128. 2015
- Fatigue characteristics of steel-making slag concrete under compression in submerged condition. 70:231-242. 2014
- Assessment of the sustainability potential of concrete and concrete structures considering their environmental impact, performance and lifetime. 67:321-337. 2014
- Eco-friendly concretes with reduced water and cement content – Mix design principles and application in practice. 67:413-421. 2014
- Combined effect of fine fly ash and packing density on the properties of high performance concrete: An experimental approach. 58:225-233. 2014
- Influence and effectiveness of water-repellent admixtures on pozzolana–lime mortars for restoration application. 49:272-280. 2013
- Local post-strengthening of masonry structures with fiber-reinforced polymers (FRPs). 25:3393-3403. 2011
- Modelling the effect of damage on transport processes in concrete. 24:1638-1648. 2010
- Characteristics of lightweight aggregates from primary and recycled raw materials. 22:703-712. 2008
- The soil condition, the foundation and the basement of the Frauenkirche in Dresden. 17:669-677. 2003
- Durability of reinforced concrete structures. 10:289-292. 1996