publication venue for

• Bridging the Gap: Assessing Material Performance of Laboratory Specimens and Concrete Structures.  16:4306-4306. 2023
• Calcined Clays from Nigeria—Properties and Performance of Supplementary Cementitious Materials Suitable for Producing Level 1 Concrete.  16:2684-2684. 2023
• Influence of Haunch Geometry and Additional Steel Reinforcement on Load Carrying Capacity of Reinforced Concrete Box Culvert.  16:1409-1409. 2023
• Significance or Scatter—Statistical Evaluation of Rapid Chloride Migration Test Results for Sprayable Cement Mortar.  15:6050-6050. 2022
• Environmental Assessment of Carbon Concrete Based on Life-Cycle Wide Climate, Material, Energy and Water Footprints.  15:4855-4855. 2022
• Accuracy of Digital Impression Taking with Intraoral Scanners and Fabrication of CAD/CAM Posts and Cores in a Fully Digital Workflow.  15:4199-4199. 2022
• External Sulfate Attack on Cementitious Binders: Limitations and Effects of Sample Geometry on the Quantification of Expansion Stress.  15:3677-3677. 2022
• Evaluation of Design Procedure and Performance of Continuously Reinforced Concrete Pavement According to AASHTO Design Methods.  15:2252-2252. 2022
• Bonding Behaviour of Steel Fibres in UHPFRC Based on Alkali-Activated Slag.  15:1930-1930. 2022
• Setting Time, Microstructure, and Durability Properties of Low Calcium Fly Ash/Slag Geopolymer: A Review.  15:876-876. 2022
• Enhanced Metakaolin Reactivity in Blended Cement with Additional Calcium Hydroxide.  15:367-367. 2022
• Use of Design of Experiments (DoE) to Model the Sulphate Agent Amount of (Ultra)Finely Ground and Fast Hardening Portland Cement Clinker.  14:5573-5573. 2021
• Material Monitoring of a Composite Dome Pavilion Made by Robotic Coreless Filament Winding.  14:5509-5509. 2021
• Automated Distinction between Cement Paste and Aggregates of Concrete Using Laser-Induced Breakdown Spectroscopy.  14:4624-4624. 2021
• Setting Time and Strength Monitoring of Alkali-Activated Cement Mixtures by Ultrasonic Testing.  14:1889-1889. 2021
• A Review of Different Aspects of Applying Asphalt and Bituminous Mixes under a Railway Track.  14:169-169. 2020
• Performance of Rice Husk Ash as Supplementary Cementitious Material after Production in the Field and in the Lab.  13:4319-4319. 2020
• Flexural and Shear Tests on Reinforced Concrete Bridge Deck Slab Segments with a Textile-Reinforced Concrete Strengthening Layer.  13:4210-4210. 2020
• Study of In Situ Foamed Fly Ash Geopolymer.  13:4059-4059. 2020
• L-Box Form Filling of Thixotropic Cementitious Paste and Mortar.  13:1760-1760. 2020
• Effects of Volume Fraction and Surface Area of Aggregates on the Static Yield Stress and Structural Build-Up of Fresh Concrete.  13:1551-1551. 2020
• Severe Sulfuric Acid Attack on Self-Compacting Concrete with Granulometrically Optimized Blast-Furnace Slag-Comparison of Different Test Methods.  13:1431-1431. 2020
• Modelling the Thermal Energy Storage of Cementitious Mortars Made with PCM-Recycled Brick Aggregates.  13:1064-1064. 2020
• Investigation of the Incompatibilities of Cement and Superplasticizers and Their Influence on the Rheological Behavior.  13:977-977. 2020
• Application of Sustainable Bamboo-Based Composite Reinforcement in Structural-Concrete Beams: Design and Evaluation.  13:696-696. 2020
• The Effect of Accelerator Dosage on Fresh Concrete Properties and on Interlayer Strength in Shotcrete 3D Printing.  13:374-374. 2020
• Second-Generation Implants for Load Introduction into Thin-Walled CFRP-Reinforced UHPC Beams: Implant Optimisation and Investigations of Production Technologies.  12:3973-3973. 2019
• Filler Effect in Shotcrete.  12:3221-3221. 2019
• Geopolymer, Calcium Aluminate, and Portland Cement-Based Mortars: Comparing Degradation Using Acetic Acid.  12:3115-3115. 2019
• Relating Ettringite Formation and Rheological Changes during the Initial Cement Hydration: A Comparative Study Applying XRD Analysis, Rheological Measurements and Modeling.  12:2957-2957. 2019
• Special Issue: Thermo-Mechanical Behaviour of Structural Lightweight Alloys.  12:2364-2364. 2019
• In Silico Optimization of Femoral Fixator Position and Configuration by Parametric CAD Model.  12:2326-2326. 2019
• Sustainable Green Pavement Using Bio-Based Polyurethane Binder in Tunnel.  12:1990-1990. 2019
• Effect of the Nano-Ca(OH)2 Addition on the Portland Clinker Cooking Efficiency.  12:1787-1787. 2019
• Environmental Assessment of Ultra-High-Performance Concrete Using Carbon, Material, and Water Footprint.  12:851-851. 2019
• Natural Keratin and Coconut Fibres from Industrial Wastes in Flame Retarded Thermoplastic Starch Biocomposites.  12:344-344. 2019
• Ceramic-Based 4D Components: Additive Manufacturing (AM) of Ceramic-Based Functionally Graded Materials (FGM) by Thermoplastic 3D Printing (T3DP).  10:1368-1368. 2017